2509518250@qq.com 
+86-0576-86110781
-
04/152022
The motor is characterized by high efficiency and reliability
The reduction motor is characterized by high efficiency and reliability, long service life, simple maintenance, wide application and so on. Its stages can be divided into single-stage, two-stage and t
-
04/112022
What if there is a broken shaft fault
How to deal with the shaft failure of the reduction motor? Handling method of broken shaft fault of reduction motor! 1. ① due to low temperature or other reasons, the fluidity of lubricating oil insid
-
04/062022
Function of reducer
1) Reduce the speed and increase the output torque at the same time. The torque output proportion is based on the motor output multiplied by the reduction ratio, but pay attention not to exceed the ra
-
04/062022
Several ways of speed regulation of speed regulating motor
The method of changing motor stator voltage to realize speed regulation is called voltage regulation. Voltage regulation and speed regulation: for single-phase motor, it can be a certain value between
-
04/022022
What checks should be carried out before the motor is used
The motor should be checked before operation to see whether there are potential safety hazards and whether it is installed in good condition. What should be checked before the gear reduction motor is
-
04/012022
What are the common faults of electrical system
1. The main drive motor does not operate normally, and the slip motor will vibrate violently during operation, causing bearing heating. Disassemble the clutch armature and magnetic pole rotor, and che
-
03/292022
Why does the DC reduction motor leak oil
Oil leakage often occurs in the use of DC reduction motor. What are the reasons for this phenomenon? 1. The hole cover plate of DC reduction motor is too thin, which is easy to deform after tightening
-
03/262022
Function of gear reduction motor
This kind of integrated body can also be called gear motor or gear motor. It is usually supplied in complete sets after integrated assembly by a professional reducer manufacturer. Reduction motors are
-
03/222022
Reason, installation and operation of aluminum casing for reduction motor
Before the reduction motor is put into operation, it needs to be installed with aluminum shell, which can improve the heat dissipation of the motor: under the working condition of the motor, due to th
-
03/102022
Function of reducer and use of reducer
1) Reduce the speed and increase the output torque at the same time. The torque output proportion is based on the motor output multiplied by the reduction ratio, but pay attention not to exceed the ra
-
03/042022
Reduction motor refers to the integration of reducer and motor (motor)
Reduction motor refers to the integration of reducer and motor (motor). This kind of integrated body can also be called gear motor or gear motor. It is usually supplied in complete sets after integrat
-
03/022022
Type of reduction motor
Servo motor is widely used in various control systems. It can convert the input voltage signal into the mechanical output on the motor shaft and drag the controlled components to achieve the purpose o
© 2022 Wenling Xiu Shi Electrical Co., Ltd.
Design by JingZhou Tech
© 2022 Wenling Xiu Shi Electrical Co., Ltd. All rights reserved. Design by JingZhou Tech
